Removed 1 wheel from vehicle, dismounted tire, cleaned corrosion from the wheel bead area, mounted and computer spin balanced new tire. re-install wheel to vehicle and torque lug nuts to manufacturer's specifications.
Service air conditioner. Check condition of all belts and lines. Evacuate and recharge with reclaimed R-134. Test system performance.
CABIN AIR FILTER – Remove & Replace
Dick D. gave our service a 5 star review on 9/14/2023
2009 Honda Element CRM Mitchell1
2023-09-16T22:00:44+00:00
STRUT ASSEMBLY – Removal & Installation – Both – [DOES NOT include disassemble or alignment.]
STABILIZER BAR CONTROL LINK – Remove & Replace – Both
Road test vehicle. Check all suspension and steering parts for wear. Check tire pressure and condition. Check riding height. Check alignment of all four wheels. Adjust caster, camber, toe-in, and thrust angle as needed on all four wheels. Center ste
ALYSSA N. gave our service a 5 star review on 7/11/2022
2018 Honda Pilot CRM Mitchell1
2022-07-12T22:02:31+00:00
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
ROTATE 4 TIRES
Vincent L. gave our service a 5 star review on 5/17/2022
Inspect hoses and clamps. Pressure test cooling system. Flush engine, radiator, and heater core in both directions. Bring antifreeze to -35 degrees. PH balance coolant to between 9.8 to 10.5. Check thermostat and electric cooling fan operation. Chec
Tim S. gave our service a 5 star review on 2/8/2022
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
ELECTRONIC IGNITION (MINOR) – Tune – [Includes: Check compression. Clean or replace Air Cleaner Element and Spark Plugs. Inspect or replace Coil Boots or Ignition Cables.]
WINDOW WASHER RESERVOIR – Remove & Replace
ALTERNATOR DRIVE BELT – Remove & Replace – [Includes: Serpentine and V-Belt type Belt(s).]
HIGH MOUNT STOP LAMP – Remove & Replace
Removed 4 wheel from vehicle, dismounted tires, cleaned corrosion from the wheel bead area, mounted and computer spin balanced new tires. re-install wheels to vehicle and torque lug nuts to manufacturer's specifications.
AXLE SHAFT ASSEMBLY – Remove & Install or Remove & Replace – One Side – [NOTE: For Independent Suspension Type Axles, Axle Shaft Assembly consists of Axle Shaft, Boots and Joints.]
Road test vehicle. Check all suspension and steering parts for wear. Check tire pressure and condition. Check riding height. Check alignment of all four wheels. Adjust caster, camber, toe-in, and thrust angle as needed on all four wheels. Center ste
BATTERY – Remove & Replace – [Includes: Test.]
Bill S. gave our service a 5 star review on 1/20/2022